Embedded Boards

Product Description Arduino Pro Mini 328 Mini ATMEGA328 - 5V/16MHz Professional version of the for Arduino Mini Pro is a micro controller circuit board. It has 20 digital input/output pin (six of them can be used as a PWM output), 8 analog input, a 16 MHZ resonator, a reset button, the installation hole lead foot.
!!! Technical parameters !!!
1. 20 digital input/output port RX and TX, D2 ~ D13, A0 ~ A52. 8 analog input port A0 ~ A73. 1 to the TTL level a serial port to send and receive port RX/TX4.6 a PWM port, D3, D5, D6, D9, D10, D115. Using Atmel Atmega328P - AU microcontroller6. Support serial download7. Support external 3.8 V ~ 12 V dc power supply8. Support the 12 v and the following batteries9. 16 MHZ clock frequency10. Size: 33.3 * 18 (mm)
Package Contains 1 X Arduino Pro Mini Development Board Burg Strips

Features:
Main changes from the older version:

• Add two rows of the holes for the pins. So it can be connected with normal Dupont line.
• Add 3 rows of the holes for wiring.
• Change the in-line package of ATMEGA328P to flat package.
• CH340G replace ATmega16U2

Testing!

• We program & test all devices with LED blinking Program.
• Please make sure to connect the device to USB & test if the LED-"L" is blinking,
• This shows the device is working perfectly (Don't modify program without completing this preliminary test).

Usage Instructions:

• Install CH340 USB Driver (Download: http://goo.gl/NWEz9O )
• Install Arduino IDE (Download: http://arduino.cc/en/Main/Software )
• Connect Board to Computer & Launch Arduino IDE.
• Select board as "Uno" in Arduino IDE.
• Select the COM port (You can know COM Port No. in Control Panel > Device Manager).
• Start burning your programs.

Technical Details:

• Microcontroller: ATmega328
• Operating voltage: 5V
• Input Voltage (recommended): 7-12V
• Digital I/O Pins: 14 ( of which 6 provide PWM output)
• Analog Input Pins: 6
• DC Current per I/O Pin: 40mA
• DC Current for 3.3V pin: 50mA
• Flash Memory: 32 KB (ATmega328) of which 0.5KB used by bootloader
• SRAM: 2 KB (ATmega328)
• EEPROM: 1 KB ( ATmega328)
• Clock Speed: 16 MHZ
• USB Chip CH340G

Package Content:

• 1 X Piece Arduino UNO R3 Compatible (Clone) Development Board - ATmega328P CH340.
• 1 X USB Cable
• Dupont Pins