? Motors - High-Torque Encoder DC Servo Motor and Driver UART, I2C, PPM Manufacturer from Chennai
Sign in
Ajlon Technologies
MPN Towers, Chennai, Tamil Nadu
09643206497
Send E-mail

Motors

We are a leading Manufacturer of High-Torque Encoder DC Servo Motor and Driver UART, I2C, PPM, Planetary Encoder Geared Motor 24v 175rpm 100w, Changeover Switch- 2 Motor System-Programmable-1 Phase and Changeover Switch- 2 Motor System-Programmable-3 Phase from Chennai, India.
Request Callback
High-Torque Encoder DC Servo Motor and Driver UART, I2C, PPM

Ask For Price

High-Torque Encoder DC Servo Motor and Driver UART, I2C, PPM

This Encoder DC Servo motor solution integrates an 0.2deg resolution optical encoder and a high power electronic servo drive on an Industrial grade high torque dc motor. It supports UART/I2C/PPM/Analog signals directly for absolute speed and absolute position control. This solution works extremely well for slow speeds by providing high correction torque through a closed PI control loop.

The Motor is a Industrial grade 60RPM high torque motor with a massive torque of 38kgcm in small size. The motor has a metal gearbox with all high quality metal gears and has a off-centered shaft.

High Torque DC Geared Motor Features

  • 60RPM /12V DC motors with Metal Gearbox and Metal Gears
  • 18000 RPM base motor
  • 6mm Dia shaft with M3 thread hole
  • Gearbox diameter 37 mm.
  • Motor Diameter 28.5 mm
  • Length 63 mm without shaft
  • Shaft length 15mm
  • 180gm weight
  • 38kgcm torque
  • No-load current = 800 mA, Load current = upto 7.5 A(Max)

Encoder and Drive Specifications

  • Zero-backlash DC servo performance
  • 0.2deg resolution optical encoder integrated on motor output shaft
  • High-Current DC Servo motor driver integrated with the motor
  • Absolute (32bit) Motor position control interface via UART, I2C, PPM signal and analog input
  • Accurate Motor speed control interface via UART, I2C, PPM signal and analog input
  • Industrial Grade Aluminum housing for motor and drive
  • Compatible with NEMA 23 mounting setup
  • Speed and position can be controlled using a terminal or MCU via simple UART commands
  • I2C master device can control multiple RMCS-220x via simple I2C command structures
  • An RC receiver or any PPM source can directly control the speed of the motor
  • An analog signal or fixed analog voltage from a potentiometer can directly control the speed of the motor

This Encoder DC Servo motor solution integrates an 0.2deg resolution optical encoder and a high power electronic servo drive on an Industrial grade high torque dc motor. It supports UART/I2C/PPM/Analog signals directly for absolute speed and

...

Read more

Yes! I am interested
Request Callback
Planetary Encoder Geared Motor 24v 175rpm 100w

Get Best Quote

Planetary Encoder Geared Motor 24v 175rpm 100w
Approx Price: Rs 8,000 / Piece

24V 100W Planetry geared motor with rated torque of 142kgcm comes with an 2000 PPR Base motor optical encoder with quadrature outputs for increment and decrement counting.

This Motor is an Industrial grade motor with replaceable carbon brushes and hardened shaft.

The 0.18 degree resolution optical encoder with quadrature outputs for increment and decrement counting. It will give 2000 transitions per base motor rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up or down count. The Encoder is build to Industrial grade.

Specifications:

  • Hardened shaft diameter: 10mm
  • Shaft Length: 23mm
  • Mounting PCB of 40mm x 4 holes.
  • Motor Diameter: 60mm
  • Motor Length without Shaft: 154mm
  • Motor Weight: 1450 grams
  • Rated Torque: 142kgcm
  • Stall Torque: 344kgcm
  • No load speed: 175RPM
  • Base Motor speed: 6000RPM
  • Base Motor count: 2000ppr
  • Geared Motor count: 72000ppr
  • Encoder attached to base motor
  • Replaceable Carbon Brushes
  • Can also be used as normal DC motor without encoder
  • No-load current = 1.12A
  • Stall current = upto 30A(Max)

Incremental Encoder Power and Input Terminal Assignments

Terminal No.

Terminal Name

Wire Color

Description

Terminal 1

GND

BLACK

Ground should be connected to negative of supply

Terminal 2

VCC

RED

VCC should be connected to ve 5V of supply

Terminal 3

Enc A

GREEN

Quadrature encoded output A

Terminal 4

Enc B

YELLOW

Quadrature encoded output B

 

24V 100W Planetry geared motor with rated torque of 142kgcm comes with an 2000 PPR Base motor optical encoder with quadrature outputs for increment and decrement counting.

This Motor is an Industrial grade motor with replaceable

...

Read more

Yes! I am interested
Request Callback
Changeover Switch- 2 Motor System-Programmable-1 Phase

Get Best Quote

Changeover Switch- 2 Motor System-Programmable-1 Phase
Approx Price: Rs 4,000 / Piece
Being one of the most emerging manufacturer and supplier of Auto Change over Switch (1 Phase)

Working Procedures:
1. Two Single phase motors can be concurrently Controlled(A motor ON/ B Motor Off and Vice Versa)
2. Delay time for motors programmable or settable

Being one of the most emerging manufacturer and supplier of Auto Change over Switch (1 Phase)

Working Procedures:
1. Two Single phase motors can be concurrently Controlled(A motor ON/ B Motor Off and Vice Versa)
2. Delay time

...

Read more

Yes! I am interested
Request Callback
Changeover Switch- 2 Motor System-Programmable-3 Phase

Get Best Quote

Changeover Switch- 2 Motor System-Programmable-3 Phase
Approx Price: Rs 7,000 / Piece
Being one of the most emerging manufacturer and supplier of Auto Change over Switch (3 Phase)

Working Procedures:
1. Two 3 phase motors can be concurrently Controlled(A motor ON/ B Motor Off and Vice Versa)
2. Delay time for motors programmable or settable
Being one of the most emerging manufacturer and supplier of Auto Change over Switch (3 Phase)

Working Procedures:
1. Two 3 phase motors can be concurrently Controlled(A motor ON/ B Motor Off and Vice Versa)
2. Delay time

...

Read more

Yes! I am interested

Tell Us What You Are Looking For?

Reach Us

Gmap

Syed Ajmal ( Managing Partner )Ajlon Technologies No. 5/575, MPN Towers, 1st Floor, Velachery Tambaram Main Road Opposite Canara Bank, Upstairs Sai Saravana Furniture, MPN Towers, Chennai - 600100, Tamil Nadu, India

+91-9643206497
Send SMS
Send E-MAIL