Water Tank Cleaning

The Tank Cleaning process Involves 6 steps:

The 6 stage water tank clean process has been developed through research and development to arrive at a fool-proof process that involves latest state-of-the-art imported equipment

Stage I

Mechanized Dewatering

In the First stage of Mechanized Dewatering of the water tank clean process the Manhole and surroundings are cleaned off dirt, mud and algae after which the water below the foot-valve level is pumped out using special de-watering equipments.

Stage II

Sludge Removal

In the Second Stage of Sludge Removal the sludge which has settled on the floor of the tank is sucked out using our special sludge pumping equipments

Stage III

High Pressure Cleaning

In the Third Stage of High Pressure Cleaning the Walls & ceilings of the tanks are thoroughly cleaned using special high pressure jet cleaners which rid of the walls off calcinations, algae and all contaminants which cling on the internal surface of the tank helping the microbiological contamination to grow.

Stage IV

Vacuum Cleaning

In the Fourth stage of the sludge removal process an Industrial Vacuum Cleaner is used to remove the resultant contaminants, making the tank absolutely speck-free.
Stage V

Anti-bacterial Spray

In the Fifth very important Stage of Anti-bacterial treatment the walls & ceilings are made totally sterile from bacterial attack using specially developed from Antibacterial agents.

Stage VI

UV Radiation

And finally in the Sixth Stage of the water tank clean process final sterilization and disinfection is done using UV Radiation by a specially developed UV Radiator which is used to kill any suspended or floating bacteria remaining in the tank.

This full procedure makes the tank 100% Bacteria free and makes it perfectly fit for storing clean drinking water. The above process is common for both the Underground and Overhead drinking water storage tanks and can be used for all types of tanks like Concrete Tanks, Fabricated Steel tanks, Plastic (Sintex Type) Tanks etc.

Our professional system also includes maintaining of computerised records of all the tanks which have been cleaned and scheduling of next cleaning operations etc. thus removing the total responsibility off the residents of any particular building to make their life totally healthy and tension free.

The total process and the unique combination of the special water tank clean Anti-bacterial agents and UV Radiation used in the process of cleaning and Dis-infection of the drinking water tanks is totally a novel feature of this cleaning process developed, tried and tested by us for the first time in India. If this process is used by all the residents of multi-storied buildings they would never have any health related problems arising out of water borne diseases (provided the water supplied by the authorities is of Potable Quality)

Minimum Order Quantity: 1 Pack

Ultrasonic Distance Measurer with Laser Pointer Digital Measuring Tool

 

 

 

Ultrasonic measuring tape will be indispensable for engineers , builders and anyone who needs a quick and accurate measurement

 

Measuring range: 0.4 - 18 m ( 1.5-60 ft)

 

Built-in Laser Pointer

 

Built-in functions to calculate : area, volume , addition, subtraction

 

Accuracy / - 0.5 ~ 1%

 

resolution 0.5in

 

Ultrasonic measuring tape equipped with LCD display with backlight

 

Switch display feet / meters

 

Operating frequency ultrasonic probe : 40kHz

 

Operating temperature: 0 ° C - 45 ° C

 

Power: 1 x battery type 9V ( not included in kit )

 

Dimensions: 155 x 72 x 48 mm

 

Weight: 162 gr

 

Options:

 

Minimum Order Quantity: 1 Piece

ludge Sucker uses a high pressure water stream (1000-3000 PSI) to suck the sludge off the bottom of pits or tanks and eject it through a 1" (13' long) hose to a disposal tank. The base unit attaches to the end of a pressure washer lance with a quick coupler for extension to the bottom of the pit. Uses a 1/4" tip for suction/power ejection.

 

Uses standard 1/4" MPT nozzle

Easy to change for different plumbing system flows and pressure

                The sludge sucker uses the pressure from the machine to create a suction effect for the pumping out of any body of water. The maximum outlet hose length, that can be used, is 6m. It is a very cheap alternative for pumping volumes of water or liquid matter up to 16000 L per hour. Due to the nature of the mechanism of suction it can be used to suck practically any type of liquid and has no working parts that require maintenance. It can also be used to refill a mobile tank that supplies the pressure cleaner from a source such as a reservoir or dam.

Minimum Order Quantity: 1 Piece

Minimum Order Quantity: 1 Piece(s)