From storage tanks to material
producing processes in automatic factory. They
require different piping, horozoutal ,conveyor,
weighing, arrangement , separate ,coding, life
testing equipment dust ,collecting, and main in
process automation. Material characteristic
(moisture, s.g., size ) and equipment design
(shape, stuff ) usually lead to accumulated or
even decreasing material delivery flow problems in
working flows. Pneumatic vibrator provides the
best solution by applied it onto problem position.
By using pneumatic vibrator to shake or peel off
clog material from applied object or to low down
friction between materials to make it move
smoothly in automatic
production.
The programmable sequential
controller is designed specifically for use with
pneumatic dust collector systems. It is used to
control the solenoid of the diaphragm valve in
order to program the pulse jet sequence of the
valves. LED lights serve as indication of status
of pulse position and timing. Both the pulse jet
timing and duration of each pulse jet could be
adjusted by the logic circuitry. The controller
has 2 independent "ON" and "OFF" methods, the 1st
is when the AC power supply is cut off, the
controller will shut down. When the AC supply is
reconnected, the controller will automatically
revert to its initial default settings. The 2nd
method is to employ the use of the controller's
remote contacts (R,C,A) as the controlling
signal.
The diaphragm valve is divided
by a diaphragm into two chambers which are
connected by an air passage which is smaller in
diameter than the orifice of the pilot valve. When
the orifice opens, the air in the upper chamber is
exhausted much faster than air can enter through
the air passage. The pressure of upper chamber
suddenly drops, the much higher pressure of the
lower chamber thus pushes the diaphragm to open
the Diaphragm Valve Unit. The abrupt air blast is
therefore directed to inflate the filter and shock
down the dust clinging. When the orifice closes,
the two chambers' pressures become equalised, the
diaphragm is pushed down (closed) by the spring
force.
From storage tanks to material
producing processes in automatic factory. They
require different piping, horizontal, conveyor,
weighing, arrangement , separate ,coding, life
testing equipment, dust collecting, and main in
process automation. Material characteristic
(moisture, S.G., size D) and equipment design
(shape, stuff D) usually lead to accumulated or
even decreasing material delivery flow problems in
working flows. Pneumatic vibrator provides the
best solution by applied it onto problem position.
By using pneumatic vibrator to shake or peel off
clog material from applied object or to low down
friction between materials to make it move
smoothly in automatic production.
