TRH-300 series utilizes a
thin-film polymer capacitor to sense relative
humidity, and a thin-film RTD to accurately sense
temperature. The sensing element's multilayer
dust, dirt, oil and common environmental
chemicals.
Electronet's Series DPC-200 WP
are Process Indicators specially designed for
various industrial applications in Hazard area
mostly in Chemical and pharmaceutical industries.
These can be used for monitoring & controlling
parameters like Temperature, Pressure, Flow,
Speed, Level etc. with the help of proper Sensors
/ Transmitters.
The sample cooler is a compact
unit, specially designed as per ASME SEC-VIII,
Div-1 & ASME PTC-19.11 to handle high pressure
& High temperature applications. These coolers
as designed for counter flow cooling to achieve
very close temperature approach of the sample to
coolant. These cooler as made up of double helix
coil which meets ASTM D1192 requirements, fitted
with a baffle for maximum efficiency. The shell is
mounted through flanged connections and it can be
removed without disturbing sample
lines.
The microprocessor based
Temperature Controller is a high quality and user
friendly product that can satisfy the user. The
temperature controller has complete functions and
utilizes a microprocessor that enables it to
deliver fast results. The temperature has enhanced
features that is critical to the user and is
expected to raise quality levels and to expand
production performances.
The Thermal Flow Switch Monitor
SP-150 is based on the principle of thermal
dispersion. A typical configuration uses two
Temperature Detectors set within the tip of the
sensor. One Temperature Detector is heated a few
degrees above the other one. As the process medium
flows over the tip of the sensor it disperses some
of the heat from the heated Temperature Detector.
The delta temperature is a function of flow
velocity and converted into electronic signal. The
open collector changes state once the set point
has been reached.
The new series of SC-204 from
ELECTRONET is unique micro-controller based
universal input process scanner is in most
miniature size with multiple features. SC-204 is a
blend of flexibility and versatility. Which can
accept the universal input and display its
processed value with optional alarm settings and
communication port. All operating parameters are
programmable through front membrane
keypad.
Electronet's Series DPC-012 are
Process Indicator / Controllers specially designed
for various industrial applications. These can be
used for monitoring and controlling parameters
like Temperature, Pressure, Flow, Speed, Level
etc. with the help of proper Sensors /
Transmitters. The control points are settable
through the potentiometers on front fascia and
control output is available at the rare
end.