The general purpose gas flow
switch is a great choice for a broad range of
relatively clean gases with non-coating
characteristics. Media examples include nitrogen
and scrubber exhaust fumes. The 1A relay provides
a reliable switch interface with remote devices
such as a PLC, SCADA or alarm. The short sensor is
intended for use in pipe or ducting from 1/2” to
1-1/2”; the long sensor is applied in 2” and up.
The switch set point may be adjusted from 1 to 90
fps. The product is broadly selected for low or
no-flow applications.
The general purpose controller
provides a single channel low flow switch with one
sensor input. The optional flash alarm brings
immediate attention to low flow conditions.
Package the controller with any of our liquid or
gas flow switches. The AC powered relay controller
has a 10A relay, adjustable time delay, LED
indicators and NO or NC invert switch. The rugged
NEMA 4X enclosure is made of UL approved fire
retardant PP with a swivel base for easy conduit
alignment.
Offered in intrinsically safe
and general purpose configurations, the loop
powered panel meter displays engineering units
connected in series with one 4-20 mA transmitter.
Select the LI25 -2001 meter for hazardous
applications with an intrinsically safe level
transmitter. Select the LI25-1001 meter for
general purpose applications. For field mount
installations, order the single or two meter NEMA
box.
The adjustable multi-point
fitting enables users to install and adjust up to
four Flowline level switches to any depth along
the entire length of track. The fitting is
typically applied in atmospheric day tanks,
process vessels and small waste sumps. Select the
appropriate track length based upon your
application tank height and add one sensor car kit
for each sensor to be installed on the track.
Order the compact junction box for sensor power,
relay and conduit termination. The rugged NEMA 4X
enclosure is made of fire retardant PP with a
swivel base for easy conduit
alignment.
The
single-point fitting enables users to install a
Flowline level switch through the top wall of the
tank. Offered in PVC, PP and PVDF materials, the
fitting is typically applied in bulk storage
tanks, day tanks and waste sumps. Each fitting is
built custom to your requirements. Select the
appropriate material based upon on your
application liquid and specify the A-dimension.
For integral wiring termination, add a compact
junction box. For installation on open tanks or
sumps, add a side mount bracket. For applications
with highly corrosive media such as nitric acid,
select the PVDF fitting material option. The
Kynar® fitting is heat welded and final assembled
to your A-dimension. Package the fitting with any
of our PVDF Kynar® or PFA Teflon® sensors. Its
level made simple!.
