|
|
| |
|
|
| |
|
Thermal Dispersion / Paddle
Type Level Switch
Thermal dispersion flow
switch is a precise flow sensing device, which
uses heat diffusion principle. The probe consists
of two temperature sensors. One sensor measures
the temperature of the fluid where the probe is
immersed. The other sensor is heated at a constant
power. This creates a temperature difference
between the two sensors. Temperature difference is
inversely proportional to the flow velocity. The
probe and housing are made by stainless steel or
engineering plastic. Since the device has no
moving parts, therefore there is no wear and tear
problem. |
|
| |
|
| |
|
| |
| |
| |
|
|
| |
|
Battery Operated Turbine Flow
Meter
The flowing media engages a
vaned rotor causing it to rotate at an angular
velocity proportional to flow rate. The pick-up
coil senses the spinning motion of the rotor
inserted in the pipe & converts it into a
pulsating electrical signal. Summation of the
pulsating electrical signal is directly related to
the total flow. The frequency is linearly
proportional to flow rate which is converted to mA
signal by electronic circuitry. |
|
| |
|
| |
|
| |
| |
| |
|
|
| |
FleetLog Vehicle Efficiency
Monitoring SystemFleetLog is Fluidynes unique
innovation for measuring and improving vehicle
Efficiency ( Mileage ). Apart from enlightening
the Fleet owner on the actual consumption of
diesel and the correct distance travelled to curb
pilferage of diesel, the system analyses the
drivers driving habit which affects the mileage
and monitors overspeeding to promote safe driving.
The system focuses on training the driver to drive
efficiently and safely to achieve the best
possible mileage.
Application Data
Request For Quotation |
|
| |
|
| |
|
| |
| |
| |
|
|
| |
|
Flow
Indicator Totalsier FL 600 LCD
Type
Electronet's FL - 600 series of
Flow Indicator is used to monitor corrected flow
with the help of Pressure & Temperature
Compensation. Flow rate is processed linearly or
Square rooted according to requirement.10point
linearisation is available in case of nonlinear
input. Flow rate is indicated on 4 digit &
Totalised flow is indicated on 8 digit display.
Three modes of operation i.e. normal, batch &
monthly are provided The built in battery back up
is provided for the memory to avoid loss of data
in case of power failure. Microcontroller based
design with full flexilibility is provided for
flow metering applications .optional high/low
relays are available on request. |
|
| |
|
| |
|
| |
| |
| |
|
|
| |
Fuel
Consumption Monitor 6622
SeriesThe Fuel Consumption Monitor is
compact fuel flow measuring system suitable for
monitoring the net fuel consumption of stationary
equipment like engines, gensets, pumpsets,
compressors etc. after accounting for the return
fuel from the engine. The unit is provided with a
self powered Flow Indicator which ensures accuracy
with a variety of fuels under all operating
conditions.
Application Data
Request For Quotation |
|
| |
|
| |
|
| |
| |
| |
|
|
| |
|
Turbine Flow Transmitter FL
102
The
flowing media engages a vaned rotor causing it to
rotate at an angular velocity proportional to flow
rate. The pick-up coil senses the spinning motion
of the rotor inside the pipe & converts it
into a pulsating electrical signal. Summation of
the pulsating electrical signal is directly
related to the total flow. The frequency is
linearly proportional to flow rate which is
converted to mA signal by electronic
circuitry. |
|
| |
|
| |
|
| |
| |
|
|
| |
